LCR-914/915/916 User Manual
1
Read First
Safety Information
Understand and follow the operating instructions carefully. Use
the meter only as specified in this manual; otherwise, the
protection provided by the meter may be impaired.
WARNING
Identifies hazardous conditions and actions that could cause
BODILY HARM or DEATH.
CAUTION
Identifies conditions and actions that could DAMAGE the meter
or equipment under test.
WARNING
˙ When using test leads or probes, keep your fingers behind the
finger guards.
˙ Remove test leads from the Meter before opening the battery
door or the Meter case.
˙ Use the Meter only as specified in this manual or the
protection by the Meter might be impaired.
˙ Always use the correct terminals, switch positions, and ranges
for measurements.
˙ Do not apply more than the rated voltage, as marked on
Meter, between terminals or between any terminal and
earth ground.
˙ Use caution with voltages above 30 Vac rms, 42 Vac peak, or
60 Vdc. These voltages pose a shock hazard.
˙ To avoid false readings that can lead to electric shock and
injury, replace the battery when the low battery indicator
appears.
˙ Discharge all high-voltage capacitors before testing.
˙ Do not use the Meter around explosive gas or vapor.
˙ To reduce the risk of fire or electric shock do not expose this
product to rain or moisture.
To Next Page
Loading...
