Need help?Do you have a question about the GW Instek GDM-8261 and is the answer not in the manual?
General| Model | GDM-8261 |
|---|---|
| Category | Multimeter |
| Display | LCD |
| DC Current Accuracy | 0.1% |
| Data Logging | Yes |
| Display Size | 5.7 inch |
| Measurement Functions | DC Voltage, AC Voltage, DC Current, AC Current, Resistance, Capacitance, Frequency, Temperature, Continuity |
| DC Current Range | 500.00μA ~ 10.000A |
| AC Current Range | 500.00μA ~ 10.000A |
| Capacitance Accuracy | 0.5% |
| Frequency Accuracy | 0.01% |
| Basic Accuracy (DC Voltage) | 0.03% |
| Interface | USB, RS232 |
| Power Supply | 100V ~ 240V AC, 50/60Hz |
Explains safety symbols used in the manual and on the device.
Provides essential safety precautions for operating and handling the device.
Instructions for performing AC and DC voltage measurements.
Guide for measuring AC and DC current using the dedicated input ports.
Explains how to measure resistance using both 2-wire and 4-wire methods.
Procedure for testing diode forward bias characteristics.
How to perform continuity checks to ensure low resistance paths.
Steps for measuring frequency and period of signals.
Instructions for measuring temperature using thermocouples or RTDs.
Setup for checking if measurements fall within specified high/low limits.
Using Digital I/O for compare measurement results (PASS/FAIL).
Steps for replacing the AC source fuse and input current fuse.
To Next Page
