GDM-8261 User Manual
78
4. Select the level using the
Up/Down key.
5. Press the Enter key to confirm
your selection. Press the Exit
key to go back to the default
display.
Display On/Off Setting (+ key lock)
Background
The display can be turned off when not used for a long
time. Note that when this function is used, the panel keys
are also locked except for the Output On/Off key. The
display is turned on by default.
Panel operation
1. Press the Output On/Off key
once. The display will be turned
off and the panel keys become
locked.
2. To on the display and enable the
panel keys, press the Output
On/Off key again.
Measurement Configuration Settings
D-Shift Settings
Background
The D-Shift setting automatically shifts the decimal point
depending on the measurement. If D-Shift is turned off,
the measured readings will be displayed at the full 6
2
1
digits with a fixed decimal place. The D-Shift setting is on
by default.
D-Shift
On, Off (default, On)
Panel operation
1. Press the Shift key, the 2nd
(Menu) key followed by the
Right key. The MEAS menu
appears.
2ND
MENU
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
To Next Page
Loading...
