SCANNER (OPTIONAL)
105
Step
Measures a single channel in the specified
range (Channel MIN~MAX)at each
trigger event. Timer settings (page 106)
apply for each channel.
Example: Step through channel 1~4 with a count of 12.
Monitor
Selects just one channel and continuously
measures it.
Setup Simple Scan
Ensure the scanner has been installed before trying to
configure the scanner (page 97).
Panel operation
1. Press the Shift key, the 2nd key
(MENU), the Left key. The Scan
menu appears.
2ND
MENU
2. Press the Down key. The Simple
Scan menu appears.
3. Press the Down key again. The
Starting (Minimum) channel
setting appears.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
To Next Page
Loading...
