REMOTE CONTROL
165
CALCulate:MATH:MMFactor
Sets the scale factor M for math measurements.
Para meter: <NRf> | MIN | MAX
Example: CALC:MATH:MMF MIN
Sets the scale factor M to the minimum allowed value.
CALCulate:MATH:MMFactor?
Returns the scale factor M used in the math measurement.
CALCulate:MATH:MBFactor
Sets the offset factor B for math measurements.
Para meter: <NRf> | MIN | MAX
Example: CALC:MATH:MBF MIN
Sets the offset factor B to the minimum allowed value.
CALCulate:MATH:MBFactor?
Returns the offset factor B used in the math measurement.
CALCulate:MATH:PERCent
Sets the Percent value setting for the math function.
Para meter: <NRf> | MIN | MAX
Example: CALC:MATH:PERC MAX
Sets the percent value to the maximum.
CALCulate:MATH:PERCent?
Returns the Percent value setting for the Math function.
TRIGger Commands
READ?
Returns 1
st
and 2
nd
display value. The Read query will not return the unit or
count number of the reading.
VAL1?
Returns the 1
st
display reading in the unit format specified in the
Configuration menu (Return Format, page 130) or from the
SYSTem:OUTPut:FORMat command (page 168).
Example: SAMP:COUN 100
VAL1?
>+0.333E-4,V DC
>+0.389E-4,V DC
> etc, for 100 counts.
Queries 100 counts of stored samples from the 1
st
display.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
To Next Page
Loading...
