GDM-8261 User Manual
80
2. Press the down key followed by
the right key three times. The
Input Resistance menu appears.
3. Press the Down key. The input
resistance setting appears.
1st display
Shows the input resistance setting
4. Select the setting using the
Up/Down keys.
5. Press the Enter key to confirm
your selection. Press the Exit
key to go back to the default
display.
AC Bandwidth Setting
Background
Sets the AC Bandwidth (filter) setting for AC
measurements. The Slow, Medium, Fast (S, M, F) rate
settings are directly tied to the AC bandwidth settings.
Rate Digits Input Frequency Readings/s
S 6 ½ 3 Hz – 300 kHz 1.2
(sec/reading)
M 5 ½ 20 Hz – 300 kHz (default) 3.38
F 4 ½ 200 Hz – 300 kHz
30
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
To Next Page
Loading...
