SYSTEM/DISPLAY CONFIGURATION
79
2. Press the down key, followed by
the right key twice to enter the
D-SHIFT menu.
3. Press the Down key. The
D-Shift setting appears.
1st display
Shows the D-Shift setting
4. Select the setting using the
Up/Down keys.
5. Press the Enter key to confirm
your selection. Press the Exit
key to go back to the default
display.
Input Resistance Setting
Background
The 0.1V and 1V DC voltage ranges can be set to an
input resistance of 10M or 10G. This setting is only
applicable for DC Voltage only.
Input
Resistance
10M, 10G (default = 10M)
Panel operation
1. Press the Shift key, the 2nd
(Menu) key followed by the
Right key. The MEAS menu
appears.
2ND
MENU
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
To Next Page
Loading...
