GDM-8261 User Manual
122
Configure Interface
Overview
Interface type USB Device
USB 1.1 or 2.0, TypeA, female
connector.
RS-232C
D-sub 9 pin, male connector. Baud rate:
230400/115200/57600/38400/19200/
9600.
GPIB (optional)
24 Pin female GPIB port
Return to Local
control mode
In order to switch back to the Local
control mode (front panel
operation), press the LOCAL key.
Configure USB Interface
USB device port
configuration
1. Press the Shift key, the 2nd
(Menu) key, the left key
repeatedly until the I/O
configuration menu appears.
2ND
MENU
2. Press the Down key and the
Right key. The USB selection
display appears.
3. Press the Down key. The USB
ON/OFF selection appears.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
To Next Page
Loading...
