GW Instek GDM-8261 - Power up

GDM-8261 User Manual
20
Power Up
Steps
1. Ensure the correct line voltage is
lined up with the arrow on the fuse
holder. If not, see page 179 to set the
line voltage and fuse.
100
220
1
2
0
2
4
0
2. Connect the power
cord to the AC
Voltage input.
Note
Make sure the ground connector on the power
cord is connected to a safety ground. This will
affect the measurement accuracy.
3. Push to turn on the
main power switch on
the front panel.















4. The display shows the model name and the version
for a few seconds.
Example: GDM-8261, V1.00
5. Followed by the default measurement settings.
6. And the interface I/O settings.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com