GDM-8261 User Manual
106
4. Move the cursor to the channel
using the Left/Right key, and
change the value using the
Up/Down key.
Range
101 ~ 118
5. When finished, press the Enter
key. The End (Maximum)
channel setting appears.
6. Move the cursor to the channel
using the Left/Right key, and
change the value using the
Up/Down key.
Range
101 ~ 118, (must be equal to or greater
than the Start (Min) channel)
7. When finished, press the Enter
key. The Timer setting appears.
8. Move the cursor to the time
setting using the Left/Right key,
and change the value using the
Up/Down key.
Range
1ms ~ 9999ms
9. Press the Enter key. The loop
(step) Count setting appears.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
To Next Page
Loading...
