Need help?Do you have a question about the GW Instek GDM-8261A and is the answer not in the manual?
General| Model | GDM-8261A |
|---|---|
| Category | Multimeter |
| Data Logging | Yes |
| Measurement Functions | DC Voltage, AC Voltage, DC Current, AC Current, Resistance, Capacitance, Frequency, Temperature |
| DC Voltage Range | 0.1 mV to 1000 V |
| AC Voltage Range | 50.000mV ~ 1000.0V |
| DC Current Range | 0.1 µA to 10 A |
| AC Current Range | 0.1 µA to 10 A |
| Capacitance Range | 10nF to 100mF |
| Frequency Range | 0.1 Hz to 1 MHz |
| Temperature Measurement | Thermocouple |
| Interface | USB, RS-232 |
| Power Supply | 100V ~ 240V AC, 50Hz ~ 60Hz |
Explains safety symbols used in the manual and on the device.
Provides general precautions and guidelines for safe operation and handling of the device.
Step-by-step instructions for turning on and initializing the multimeter.
Details how to perform AC and DC voltage measurements.
Guides on selecting appropriate voltage ranges for accurate measurements.
Explains how to perform AC and DC current measurements.
Guides on selecting appropriate current ranges for accurate measurements.
Details how to perform 2-wire and 4-wire resistance measurements.
Describes the procedure for testing diodes using the multimeter.
Explains how to perform continuity tests to check for electrical connections.
Details how to measure signal frequency and period.
Explains how to measure temperature using thermocouples or RTD sensors.
Guides on selecting the correct thermocouple type for accurate temperature readings.
Details how to select the appropriate sensor type for temperature measurements.
Explains how to measure power levels in dBm, dB, and Watts.
Describes how to capture and view maximum and minimum readings.
Details how to measure values relative to a stored reference.
Explains how to freeze the current measurement display based on a threshold.
Guides on setting limits and comparing measurements against them, with I/O output.
Lists the general operating and environmental specifications of the multimeter.
Detailed accuracy specifications for DC voltage, current, resistance, and continuity measurements.
Detailed accuracy specifications for AC voltage and current measurements.
To Next Page
