SYSTEM/DISPLAY CONFIGURATION
95
Gate Time Setting
The gate time settings determine the accuracy of the
frequency and period measurements. The gate time
settings are the equivalent to the Fast, Medium and Slow
rate settings.
The gate time settings are analogous to the rate settings.
1. Press the Shift key followed by
the 2nd (Menu) key. Press the
right key three times. The Hz/P
menu appears.
2. Press the Down key, the right
key and then the down key. The
gate time settings menu appears.
Shows the gate time setting
3. Select the gate time using the
Up/Down key.
4. Press the Enter key to confirm
your selection. Press the Exit
key to go back to the default
display.
www. .com
information@itm.com1.800.561.8187
To Next Page
Loading...
