Connect the power cord and turn On the power.
1. Press the Shift key, the 2nd
(Menu) key, and then the left key
repeatedly until the I/O
configuration menu appears.
2. Press the Down key and the
Left key repeatedly until the
GPIB selection display appears.
Note: The GPIB menu will be
selectable only when the GPIB
card is installed.
3. Press the Down key. The GPIB
ON/OFF selection appears.
4. Press the Up/Down key to
select ON or OFF.
www. .com
information@itm.com1.800.561.8187
To Next Page
Loading...
