GW Instek GDM-8261A - Save Instrument Settings

GDM-8261A User Manual
100
Save Instrument Settings
Background
The GDM-8261A can save up to 5 instrument settings.
The settings can save the state, function, I/O and range.
Upon powering up, the current instrument setting is
displayed.
Parameter
Save (1-5), Del-All
Saved
Parameters
 Main display parameters
 2nd display parameters
 Filter settings
 Beep settings
 I/O settings
 System Delay Time
 Backlight (Light) settings
 Math settings
 Auto-Zero settings
 Auto-Gain settings
 Scanner settings
 Settings for each function
 Continuity threshold
 TCO settings
 D-Shift
 Bandwidth
 Gate time
 RTD settings
 Input Resistance
 Input Jack
 I-DET
 TX TERM
Set Instrument
Setting
1. Press the Shift key followed by
the 2nd (Menu) key. The
SYSTEM menu appears.
/ EXITSHIFT
2ND
MENU
2. Press the Down key followed by
the Right key three times. The
Save menu appears.
TRIG
TRIG
TRIG
3. Press the Down key to enter the
Save menu.
www. .com
information@itm.com1.800.561.8187