GDM-8261A User Manual
68
Math Measurement
Math measurement runs four types of mathematical
operations, MX+B, 1/X, Percentage and Stats, based on
the other measurement results.
Multiplies the reading (X) by the factor (M)
and adds/subtracts offset (B).
Inverse. Divides 1 by the reading (X).
Runs the following equation.
Performs standard deviation calculations
on measurement data.
Press the Shift key followed by the
2/4W (Math) key. The MX+B
setting appears.
Indicates MX+B (The letter M flashes)
1. Use the Left/Right key to move
the cursor (flashing point)
between the factor, digits, and
decimal point.
www. .com
information@itm.com1.800.561.8187
To Next Page
Loading...
