GDM-8261A User Manual
152
5. Press the Up/Down key to edit
the selected digit.
6. Press the Enter key to confirm
and automatically go onto D2.
7. Repeat steps 4 to 6 for D2, D3 and D4.
8. Press the Exit key to exit from
the configuration menu.
1. To make any changes take effect, set RESET to YES.
See page 144 for details.
1. Press the Shift key, the 2nd
(Menu) key, and the Left key
repeatedly until the SET LAN
configuration menu appears.
Note: SET LAN will only be
available after LAN has been
activated in the I/O menu, see
page 142.
2. Press the Down key and the
Right key repeatedly until the
MAC menu level appears.
www. .com
information@itm.com1.800.561.8187
To Next Page
Loading...
