GW Instek GDM-8261A - Continuity Test

GDM-8261A User Manual
38
Continuity Test
Background
Continuity test checks that the resistance in the DUT is
low enough to be considered continuous (of conductive
nature).
1. Activate
continuity test
Press the
/
key twice.
/
/
2. Continuity
mode display
appears
W
S
/
+ Ω
Indicates Continuity test
CONT
2nd display shows the title
3. Connect the
test lead and
measure
Connect the test lead between the Ω
and the COM port. The display
updates the reading.
INPUT
V W
COM
www. .com
information@itm.com1.800.561.8187