GW Instek GDM-8261A - Statistics Calculations

ADVANCED MEASUREMENT
71
1. Use the Left/Right key to move
the cursor (flashing point)
between the digits and decimal
point.
HOLD TRIG
2. Change the parameter using the
Up/Down key.
3. Press the Enter key to confirm
editing.
AUTO
ENTER
3. View
Percentage
SDC
V
AUTO
MATH
1st display
Shows the calculated result
2nd display
Indicates the Percentage measurement
MATH
Indicates Math operation
Statistics Calculations
Background
The Analyze Stats menu allows you to make statistical
calculations on a continuous or user-defined number of
measurement counts. The measurements supported
include, Maximum, Minimum, Average and Standard
deviation.
Number of
counts
User Defined
2~100,000 counts
Continuous
9,999,999 count
1. Activate
Statistics
Press the Shift key, the 2/4W (Math)
key, the Up key. The Analyze Stats
setting menu appears.
/ EXITSHIFT
2/4W
MATH
www. .com
information@itm.com1.800.561.8187