GW Instek GDM-8261A - Interface Configuration

GDM-8261A User Manual
132
Configure Interface
Overview
Interface type
USB Device
USB 1.1 or 2.0, TypeA, female
connector.
RS-232C
D-sub 9 pin, male connector. Baud rate:
230400/115200/57600/38400/19200/
9600. Data bits: 8, Parity: none,
Stop bits: 1, Flow control: none.
GPIB (optional)
24 Pin female GPIB port
LAN (optional)
10BaseT/100BaseTx
Return to Local
control mode
In order to switch back to the Local
control mode (front panel
operation), press the LOCAL key.
2ND
LOCAL
Configure USB Interface
USB device port
configuration
1. Press the Shift key, the 2nd
(Menu) key, and then the left key
repeatedly until the I/O
configuration menu appears.
/ EXITSHIFT
2ND
MENU
HOLD
2. Press the Down key and the left
key repeatedly until the USB
selection display appears.
HOLD
www. .com
information@itm.com1.800.561.8187