GW Instek GDM-8261A - Configure Telnet Port

REMOTE CONTROL
153
3. Press the Down key. The MAC
address appears.
4. Press the Exit key to exit from
the configuration menu.
/ EXITSHIFT
Configure Telnet Port
Background
The GDM-8261A can set the telnet port used for virtual
private networks. By default the telnet port is set to port
23.
1.Telnet Port
Configuration
1. Press the Shift key, the 2nd
(Menu) key, and the Left key
repeatedly until the SET LAN
configuration menu appears.
Note: SET LAN will only be
available after LAN has been
activated in the I/O menu, see
page 142.
/ EXITSHIFT
2ND
MENU
HOLD
2. Press the Down key and then
the Right key repeatedly until
the TELNET selection display
appears.
TRIG
www. .com
information@itm.com1.800.561.8187