GW Instek GDM-8261A - Max;Min Measurement

ADVANCED MEASUREMENT
61
Max/Min Measurement
Applicable to
ACV
DCV
ACI
DCI
2/4W
Hz/P
TEMP
Background
Maximum and Minimum measurement stores the highest
(maximum) or lowest (minimum) reading and shows it on
the 1
st
display when the 2nd key is pressed.
1. Activate
Max/Min
For Max measurement, press the
MX/MN key once.
MX/MN
For Min measurement, press the
MX/MN key twice.
MX/MN
MX/MN
2. Max (Min)
result is
activated
MAXS
V
MAXAUTOAC
MIN (MAX)
Indicates Min (Max) measurement is
activated
1V
2nd display shows the Min (Max) range
View Max
(Min)value
Press the 2nd key to view the Max
(Min) value.
2ND
Max (Min)
measurement
appears
V
MAXS MAXAUTOAC
2nd display
Indicates that the Max (Min) value is
displayed on the 1st display
1st display
Shows the Max (Min)value at full scale
Deactivate
Max/Min
measurement
To cancel the Max/Min
measurement, press the MX/MN
key for 2 seconds, or simply activate
another measurement.
MX/MN
(hold for 2
seconds)
www. .com
information@itm.com1.800.561.8187