GDM-8351 User Manual
108
CONFigure Commands
CONFigure:VOLTage:DC
Sets measurement to DC Voltage on the first display and
specifies the range.
Parameter: [None] | [Range(<NRf> | MIN | MAX | DEF)]
Example: CONF:VOLT:DC 1
Sets the voltage range to 1 volt.
CONFigure:VOLTage:AC
Sets measurement to AC Voltage on the first display and
specifies the range.
Parameter: [None] | [Range(<NRf> | MIN | MAX | DEF)]
Example: CONF:VOLT:AC
Sets the AC range to auto range.
CONFigure:VOLTage:DCAC
Sets measurement to DC+AC Voltage on the first display and
specifies the range.
Parameter: [None] | [Range(<NRf> | MIN | MAX | DEF)]
Example: CONF:VOLT:DCAC
Sets the DC+AC voltage range to auto range.
CONFigure:CURRent:DC
Sets measurement to DC Current on the first display and
specifies the range.
Parameter: [None] | [Range(<NRf> | MIN | MAX | DEF)]
Example: CONF:CURR:DC 10e-3
Sets the DC current range to 10mA.
To Next Page
Loading...
