GW Instek GDM-8351 - Measure 1;X

OPERATION
73
decimal point.
3. Press Enter to confirm the M factor settings and
to automatically move onto the B offset setting.
4. Edit the B offset in the same fashion as the M
factor was edited.
5. Press Enter to confirm the B offset setting and
to begin the MX+B measurement.
Display
GPIBCVCCSWEEPFILTRCLSTOCOMP2ND
EXTSHIFTERRLIMITAUTOMATH4W2WDCAC
m
M
C
mdB
%
AVmm
HzWkM
WSFC
RMTMAXMINRELHOLDSMFAUTO4W2WDCAC
nμF
MX+B meausurement
reading
MX+B math
indicator
Deactivate Math
Measurement
Press SHIFT → MX/MN(MATH) to deactivate
the MATH function, or simply activate another
measurement function.
Measure 1/X
Procedure
1. Press SHIFT → MX/MN(MATH) to enter the
MATH menu.
The MX+B setting appears.
2. Press the Down key twice to skip past MX+B
settings and go to the 1/X settings.
1/X will be flashing in the secondary display.