GW Instek GDM-8351 - Measure:capacitance; Measure:continuity; Measure:diode; Measure:period

COMMAND OVERVIEW
117
MEASure:PERiod?
Returns the period measurement on the first display.
Parameter: [None] | [Range(<NRf> | MIN | MAX | DEF)]
Example: MEAS:PER? MAX
Returns the period at the maximum range.
MEASure:CONTinuity?
Returns the continuity measurement on the first display.
Example: MEAS:CONT?
Returns the continuity.
MEASure:DIODe?
Returns the diode measurement on the first display.
Example: MEAS:DIOD?
Returns the diode measurement.
MEASure:CAPacitance?
Returns the capacitance measurement on the first display.
Example: MEAS:CAP?
Returns the capacitance measurement.
MEASure:TEMPerature:TCOuple?
Returns the temperature for the selected thermocouple type on
the first display.
Parameter:[NONE] | J | K | T
Example: MEAS:TEMP:TCO? J
> +0.02667E+03
Returns the temperature measurement.