GDM-8261 Remote Viewer Guide
23
4. Wait for the Test Time to finish
or click the START button again
to finish.
Note
The file will only save after the test time has
been completed or the Start button has been
pressed again.
Load data
1. Click on the Load button at the
lower right side of the screen.
2. The graph mode screen opens.
3. Click on the Open File button.
4. A file dialog window opens, pointing to the saved
measurement files in the remote viewer software
directory. Select a data file and click on the Open
button.
5. The measurement data will be displayed in the data
plane in the lower left part of the screen.
To Next Page
Loading...
