GW Instek GDM-8261 - AC;DC Current Measurement

GDM-8261 Remote Viewer Guide
30
The data field below the each channel will display
the scan results after each scan.
Scan results
10. Stop Scanning
Press STOP to stop scanning during a
scan.
11. Save settings
All the channel, scan and count settings can be
saved and restored for later use.
1. Click the ScanBox
Setting button at the
top of the screen.
2. Select Save ScanBox
Status(S).
3. A pop-up window will appear. Enter a filename for
the ScanBox Status and click OK.
4. The filename will be saved as a *.ini file.
12. Load settings
1. Click the ScanBox
Setting button at the
top of the screen.
2. Select Load ScanBox
Status(S).
3. A pop-up window will appear. Select a *.ini file to
load.