1. Launch “DMM Firmware Upgrade.exe”,
located in the User Manual CD under the
Software\DFU Software directory.
2. Click the Browse button and select the
firmware file (GW GDM8351_VXXX.bin).
3. Check the “Verify After Program” option to
verify that the upgrade was performed
successfully.
4. Check the “Reset DMM After Program” to reset
the DMM after the upgrade.
5. Press “Upgrade” to perform the upgrade.
“DMM Firmware Operation Complete” will be
shown in the message area when the procedure
has been completed.
To Next Page
Loading...
