GW Instek GDS-200 Series Safe Mode Firmware Update Manual

GDS-200 & GDS-300 Safe Firmware Update Manual
6
6. Once the file is copied to the GDS-200/300 disk,
rename it as follow if needed: gds200.upg.
7. Disconnect the USB cable from the GDS-200/300.
The firmware update procedure will start
automatically.
8. After the update procedure has completed, reboot
the GDS-200/300 to finalize the upgrade.

GW Instek GDS-200 Series Specifications

General

Brand	GW Instek
Model	GDS-200 Series
Category	Test Equipment
Language	English