GW Instek GDS-200 Series Safe Mode Firmware Update Manual

UPGRADE PROCEDURE
5
2. The following message should appear on the screen.
If it does not appear and the GDS-200/300
continues to boot until normal operation starts,
turn-off the device and start again.
3. Connect the GDS-200/300 to your PC using the
type A / mini-B USB cable.
4. The GDS-200/300 should appear on your PC as a
remote removable disk.
5. Copy a valid firmware file onto the removable disk.

GW Instek GDS-200 Series Specifications

General

Brand	GW Instek
Model	GDS-200 Series
Category	Test Equipment
Language	English