SAVE/RECALL
207
Only one host connection, front or rear, is allowed at a
time.
The USB Device port on the rear panel cannot be used
concurrently with the USB Host port on the rear panel.
2. Press the Save/Recall key.
3. Press Recall Setup from the bottom
menu.
4. Press From (internal memory) or
From File and choose a source to
recall from.
* Only files in the current file path will be
available.
5. Press Recall Now to confirm
recalling. When completed, a
message appears at the bottom of
the display.
The file will not be recalled if the
power is turned off or the USB drive is
taken out before the message appears.
To edit USB flash drive contents
(create/ delete/ rename files and
folders) or to set the file path, press
File Utilities. For details, see page 211.
To Next Page
Loading...
