GW Instek GPT-9903 - System Commands

REMOTE CONTROL
123
System Commands
SYSTem:LCD:CONTrast ...................................................................... 123
SYSTem:LCD:BRIGhtness .................................................................... 123
SYSTem:BUZZer:PSOUND .................................................................. 124
SYSTem:BUZZer:FSOUND .................................................................. 124
SYSTem:BUZZer:PTIMe ....................................................................... 124
SYSTem:BUZZer:FTIMe ....................................................................... 125
SYSTem:ERRor ...................................................................................... 125
SYSTem:GPIB:VERSion ........................................................................ 126
SYSTem:LCD:CONTrast
Set
Query
Description
Sets the contrast of the LCD display from 1 (low)
to 8 (bright).
Syntax
Query Syntax
SYSTem:LCD:CONTrast <NR1>
SYSTem:LCD:CONTrast?
Parameter/
Return parameter
<NR1>
1~8
Example
SYST:LCD:CONT 5
Sets the display contrast to 5.
SYSTem:LCD:BRIGhtness
Set
Query
Description
Sets the brightness of the LCD display from
1(dark) to 2(bright).
Syntax
Query Syntax
SYSTem:LCD:BRIGhtness <NR1>
SYSTem:LCD:BRIGhtness?
Parameter/
Return parameter
<NR1>
1 (dark), 2 (bright)
Example
SYST:LCD:BRIG 2
Sets the display brightness to bright.
w ww . . co m
information@itm.com1.800.561.8187