1. In special test mode (000), tests are
started and stopped in the same
way as for the normal manual test
mode. See page 64 for details.
2. If required, the scroll wheel can be
used to set the voltage level in real-
time as the test is running (this
does not apply to IR or GB tests).
0.050kV ~ 5kV
0.050kV ~ 6kV
Test judgments are the same as
those for the normal manual tests.
Please see the PASS/FAIL MANU
Test section for details.
Unlike normal manual tests, the special test
mode also has an option to view the resultant
test as a sweep graph.
This option is only available for the
GPT-9901A/9902A/9903/9903A/9904.
1. When the test has finished, press
the SWEEP key to view the results
of the sweep in a graph.
w ww . . co m
information@itm.com1.800.561.8187
To Next Page
Loading...
Need help?
General
