GW Instek LCR-819 User Manual

LCR-800 Series User Manual
i
CONTENTS PAGE
1. INTRODUCTION……………………………………..……... 1
2. PRECAUTIONS BEFORE OPERATION…….…………….
2-1.Unpacking the instrument………………….…………….
2-2.Checking the Line Voltage…………………..……………
2-3.Environment……………………………………..………..
2-4.Equipment Installation, and Operation…………………
2
2
2
3
3
3. PANEL DESCRIPTION…...……………………..………….. 4
OPERATION…………….………………………………...….
4-1.Connects to DUT….………………..………….……..…...
4-2.Start-Up……….....……………………………..………….
4-3.Zeroing…………………………………………………….
4-4.Menu Functions.…..………………………………………
4-5.Measurement Condition…..……………………………...
8
8
8
8
11
18
4.
5.
SPECIFICATIONS…………………………………………...
35
6. MESSAGE CODE.………………………………………….... 42
7. MAINTENANCE....…………………………………………... 43
8. OPTION 1 (BIN Function for LCR-826/827/829 only)……..
8-1. BIN Functions for Components Sorting……………..….
8-2. BIN Setting Conditions:...………………………………..
8-3. BIN Range Setting: Component Sorting Range..............
44
44
46
52
9. OPTION 2 (RS-232, for LCR-816/817/819 only)…………… 61

GW Instek LCR-819 Specifications

General

Type	LCR Meter
Basic Accuracy	0.1%
Measurement Parameters	L, C, R, Z, θ
Interface	RS-232
Power Supply	100-240 VAC, 50/60 Hz

Summary

SAFETY TERMS AND SYMBOLS

Warning and Caution Statements

Description of safety warnings.

Safety Symbols

Description of various safety symbols.

Electrical Wiring for United Kingdom

Power Cord Wire Color Coding

Explanation of wire colors and connections.

Fuse Protection and Replacement

2. PRECAUTIONS BEFORE OPERATION

Unpacking, Inspection, and Voltage Checks

Procedures for unpacking, inspection, and voltage verification.

Operating Environment and Installation

4. OPERATION

Connecting to the Device Under Test (DUT)

Explanation of the four-wire measurement.

Instrument Start-Up and Zeroing

Steps to power on and zero the instrument.

Open and Short Circuit Zeroing

Detailed steps for open and short circuit zeroing.

4. Menu Functions

Measurement Display Modes

Nominal Value and Measurement Speed Settings

How to input nominal value and select measurement speed.

4. Measurement Conditions

Bias Voltage and Test Frequency Settings

Details on bias voltage and test frequency.

D/Q in PPM, Test Voltage, and Constant Voltage

Settings for PPM, test voltage, and constant voltage.

Range Hold and Averaging Functions

Memory Store/Recall and Handler Interface

Saving settings and external automation interface.

Handler Interface Signals and Timing

7. MAINTENANCE

Cleaning Instructions

Battery Replacement Caution

Safety notes for battery replacement.

8. OPTION 1: BIN Functions

BIN Functions for Components Sorting

Overview of BIN sorting.

BIN Setting Conditions

BIN Range Setting: Component Sorting