GW Instek SFG-2104 - Set Amplitude; Normal Output; Attenuate by −20 Db

To Next Page

To Previous Page

SINE/SQUARE/TRIANGLE WAVE

Set Amplitude

Normal

output

ADJ

−20dB

AMPL

Turn the Amplitude knob right

(increase) or left (decrease).

The range is 10Vpp for 50Ω load.

Attenuate by

−20dB

Sine/square/triangle waveform can be attenuated by

−20dB, in two ways: −40dB altogether.

Method1

Pull out the Amplitude knob. The

output amplitude is attenuated by

−20dB (no display sign).

−20dB

Method2

Press the shift key, then 8. The output

amplitude is attenuated by −20dB. The

−20dB sign appears on the display.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Related product manuals