SFG-2000 Series User Manual
50
Sweep for Speaker Test
Description
Use the sweep feature in SFG-2000 series for testing the
frequency response of an audio speaker.
Test
description
1. Set SFG output to sine wave, 20Hz.
2. Activate sweep and set LIN/LOG, sweep time, and
sweep span.
3. Change the frequency if other bands need to be
tested.
Block diagram
SFG series
Speaker
Amplifier
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
