Need help?Do you have a question about the GW Security 55 Series and is the answer not in the manual?
Details about the NVR's rear panel ports and their connections.
Explanation of the remote controller's buttons and functions.
Steps for installing the Hard Disk Drive (HDD) into the NVR.
How to connect IP cameras and monitors to the NVR.
Instructions for connecting the NVR's power supply.
Details on using the left and right mouse buttons for NVR operations.
Explanation of how to use the on-screen virtual keyboard for data input.
Setting up passwords and manually locking the NVR screen for security.
Guide to the initial setup wizard for NVR configuration.
Instructions for formatting and managing the HDD during NVR setup.
Configuring network parameters like PPPoE, DHCP, or Static.
Adding and modifying IP camera configurations during initial setup.
Setting up recording schedules and modes for each channel.
Configuring general system parameters like date, time, and language.
Accessing and understanding the NVR's pop-up menu options.
Explanation of various status icons displayed on the NVR interface.
Describes the functions of icons in the pop-up menu bar.
Functions available in the camera quick toolbar for live view.
General overview of the NVR's main menu settings.
Configuration options for display settings on the NVR.
Adding, editing, and deleting IP cameras connected to the NVR.
Configuring live view channel parameters like name, format, and refresh rate.
Configuring video output parameters like resolution and sequence mode.
Adjusting camera image settings like brightness, contrast, and saturation.
Creating privacy zones to mask specific areas in the video feed.
Configuration options for recording settings on the NVR.
Configuring basic recording parameters for each channel.
Defining recording schedules and modes (Normal, Motion, Alarm).
Configuring mainstream video recording parameters like resolution and bitrate.
Configuring substream video recording parameters for remote viewing.
Configuring mobilestream video parameters for mobile device access.
Configuration options for network connectivity on the NVR.
Configuring network connection types (DHCP, Static, PPPoE) and parameters.
Configuring POE interface settings and switch modes.
Setting up email notifications for system events like motion or HDD errors.
Scheduling when email notifications are sent for different event types.
Configuring Dynamic DNS settings for remote access.
Configuring RTSP protocol for remote video streaming.
Enabling FTP for viewing and loading captured snapshots.
Configuration options for alarm inputs and events.
Configuring motion detection parameters and actions.
Configuring external sensor I/O alarm inputs and triggers.
Linking PTZ cameras with motion or alarm events.
Searching and playing back recorded videos by various parameters.
Searching and playing back recorded videos by date and type.
Checking recording file lists and performing backups.
Navigating and controlling video playback.
Backing up specific sections of video recordings.
Adjusting the time bar display for video playback.
Dividing and playing video recordings in segments.
Instructions for playing backed-up video files using provided software.
Configuration options for device settings like HDD and PTZ.
Configuring and managing the Hard Disk Drive (HDD) status.
Assigning channels to disk groups for recording management.
Configuration options for PTZ control and setup.
Configuring Pan-Tilt-Zoom (PTZ) settings for dome cameras.
Operating PTZ cameras using the NVR interface.
Configuration options for system-wide settings.
Configuring general system settings like date, time, and language.
Configuring Daylight Saving Time (DST) settings.
Setting up Network Time Protocol (NTP) for automatic time synchronization.
Managing user accounts and login information.
Viewing system summary, channel, and record information.
Viewing and backing up system operation logs.
Accessing advanced configuration options and maintenance.
Configuring maintenance tasks like auto-reboot and firmware updates.
Setting up event notifications for disk errors, video loss, etc.
Overview of intelligent analysis features like intrusion detection.
Configuring schedules for intelligent detection functions.
Setting up Perimeter Intrusion Detection rules and actions.
Configuring Line Crossing Detection rules and actions.
Setting up Stationary Object Detection rules and actions.
Setting up Pedestrian Detection rules and actions.
Setting up Face Detection rules and actions.
Configuring Cross-Counting rules for objects crossing virtual lines.
Viewing alarm events and results of intelligent analysis.
Manually turning off or rebooting the NVR.
Steps for downloading and installing the web client plugin for remote access.
Overview of web client management features.
The initial screen of the web client for live preview and control.
Remote PTZ control via the web client.
Remotely viewing recorded videos via the web client.
Searching recorded video files remotely via the web client.
Detailed controls for video playback via the web client.
Remotely configuring NVR settings via the web client.
Configuring local save paths for recordings and snapshots on the PC.
Instructions for installing and setting up the RXCamView mobile app.
Solutions to common problems encountered with the NVR system.
Recommended practices for maintaining the NVR system.
Visual representation of how system components connect.
List of included accessories with the NVR.
General| Series | 55 Series |
|---|---|
| Video Output | HDMI, VGA |
| Type | NVR (Network Video Recorder) |
| Max Storage Capacity | Varies by model (supports multiple HDDs) |
| Resolution Support | Up to 4K (3840x2160) |
| Compression | H.264, H.265 |
| Network Interface | Gigabit Ethernet |
| Operating Humidity | 10% to 90% |
To Next Page
