To Next PageTo Next Page
Need help?Do you have a question about the GW Security GW-NVR3208E and is the answer not in the manual?
Overview of the GW SMART Series NVR's capabilities and performance.
Detailed technical specifications including video input, output, and network capabilities.
Essential safety precautions and warnings for proper installation and operation.
Steps for powering the NVR on and safely shutting it down.
Step-by-step guide to configuring the NVR using the initial setup wizard.
Accessing and playing back recorded video data by date and time.
Configuration for video recording parameters, manual, and scheduled recording.
Configuration for motion detection, alarm output, and other alarm types.
Managing IP cameras, including adding, deleting, and viewing their status.
Configuration for general, time, output, and network settings.
Managing hard disk drives, including basic info, groups, storage, and SMART status.
Options for quick settings, user management, factory reset, and firmware upgrades.
Methods for performing immediate, manual, or scheduled backups of recorded data.
Settings for video resolution, frame rate, bitrate, pre-record, and delay record.
Configuration for motion detection sensitivity, area, and linkage settings.
Steps to add IP cameras to the NVR using manual or smart access features.
Resetting to factory defaults and firmware upgrade procedures.
General| Brand | GW Security |
|---|---|
| Model | GW-NVR3208E |
| Category | Network Hardware |
| Language | English |
