Do you have a question about the GW Security GW-NVR3216E and is the answer not in the manual?
Details the technical specifications of different NVR models, covering video input, network, storage, and power.
Outlines electrical, transportation, and general safety precautions to follow during installation and operation.
Illustrates how to connect cables and components, including cameras and monitors, to the NVR.
Provides step-by-step instructions for opening the front panel and installing the hard drive.
Explains the procedure for powering the NVR on using the rear switch and shutting it down.
Guides through the initial setup process, including date, time, network, and IP camera configuration.
Search and Playback the recorded video by entering a specific date and time.
Sets video recording parameters like resolution, frame rate, and bitrate.
Configures motion detection sensitivity and areas for alarm triggering.
Details methods for adding IP cameras to the NVR system, including manual and smart access.
Configures host name, resolution, language, auto-lock, and beep sound settings.
Manages system time, date format, time standard, and daylight saving time.
Manages network settings including IP, DDNS, email, cloud services, and port forwarding.
Instructions for upgrading the NVR firmware via web browser, USB, or FTP.
| Max HDD Capacity | 10TB per HDD |
|---|---|
| Video Output | 1x HDMI, 1x VGA |
| USB Interface | 2x USB 2.0 |
| Operating System | Embedded Linux |
| Max Resolution | 8MP (3840x2160) |
| Audio Output | 1x RCA |
| Network Interface | 1x RJ45 10/100/1000Mbps |
| Operating Temperature | -10°C ~ 55°C |
| Operating Humidity | 10% ~ 90% |
Loading...