Gymna ShockMaster 500 User Manual (English)

Other manuals for Gymna ShockMaster 500

Questions and Answers:

Lisa Gibbs PhDAug 15, 2025

What to do if Gymna ShockMaster 500 has no shockwave power output?

P
Philip AllenAug 15, 2025
If your Gymna Medical Equipment isn't producing shockwaves, there could be several reasons: * Check the compressed air supply, especially if you're using a SHOCKMASTER500. * Inspect the handpiece cable for leaks or connection issues. * Verify the handpiece trigger button is working correctly. * Clean the guide tube and projectile; if necessary, replace them.

Albert FrancisAug 18, 2025

What to do if my Gymna SHOCKMASTER500 Medical Equipment has no compressed air supply?

R
Robert WilliamsAug 18, 2025
If your Gymna SHOCKMASTER500 Medical Equipment lacks compressed air, ensure the power plugs are correctly installed. The compressor mains plug should be in the trolley's power socket, and the trolley's power cord should be in the main unit's compressor socket. Also, remove the transport protection (red cap) from the compressor air inlet and install the inlet filter.

Channels

Single channel

Pressure

1 to 5 bar

Frequency

1 to 21 Hz

Display

Color touchscreen

Application

sports medicine

Frequency Range

1-21 Hz

Intensity Levels

Adjustable