FlowVis® - INSTRUCTION MANUAL Page 5
8.0INSTALLATION
Installation of the FlowVis® should be in accordance with the following instructions.
Normal plumbing procedures such as cleaning, priming and gluing of xtures should be
followed in order to avoid leaks.
Unlike other ow meters, FlowVis® is not e ected by ow stream disturbances caused
by its proximity to pumps, elbows, tees, valves etc. FlowVis® does not require speci c
straight pipe lengths before or after its point of installation and can be installed close to,
or even adjacent to other plumbing ttings. FlowVis® can be installed either horizontally
or vertically.
NOTE: When selecting a physical location to install FlowVis®, be sure to allow accessibil-
ity to read the scale on the lid.
To Next Page
Loading...