29
IRF 3.1 commands
description
Use description to configure a description for a PEX group.
Use
undo description to restore the default.
Syntax
description text
undo description
Default
The description of a PEX group uses the PEX group group-id format (for example, PEX group 2).
Views
PEX group view
Predefined user roles
network-admin
Parameters
text: Specifies a description, a case-sensitive string of 1 to 79 characters.
Examples
# Configure the description as text for PEX group 1.
<Sysname> system-view
[Sysname] pex group 1
[Sysname-pex-group-1]description test
Related commands
pex group
display pex interface
Use display pex interface to display PEX information for a cascade port or for all cascade
ports.
Syntax
display pex interface [ interface-name ] [ brief ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface-name: Specifies a cascade port. If you do not specify a cascade port, this command
displays PEX information for all cascade ports.
To Next Page
Loading...
