Need help?Do you have a question about the H3C S1526 and is the answer not in the manual?
General| Switch Type | Unmanaged |
|---|---|
| Layer | Layer 2 |
| Switching Capacity | 8.8 Gbps |
| Forwarding Rate | 6.55 Mpps |
| MAC Address Table Size | 8K |
| Management | Unmanaged |
| Power Supply | 100-240 VAC, 50/60 Hz |
| Weight | 2.5 kg |
| Operating Temperature | 0°C to 45°C |
| Storage Temperature | -40°C to 70°C |
| Ports | 24 x 10/100 Mbps |
| VLAN Support | No |
| Jumbo Frame | 9K |
| Dimensions (W x D x H) | 440 mm x 160 mm x 44 mm |
| Operating Humidity | 10% to 90% (non-condensing) |
| Storage Humidity | 5% to 95% (non-condensing) |
Explains the document's goal to guide users through configuring, using, and managing the product.
Targets network administrators with basic network knowledge and terms.
Outlines the manual's structure, listing chapters and their content.
Explains the various conventions used in the manual for clarity and consistency.
Introduces the H3C S1526 Smart Ethernet Switch and its suitability for small/medium enterprises.
Lists the rich features offered by the S1526 switch.
Details computer system/hardware and network requirements for Web access.
Covers logging in to the Web NMS and initial page navigation.
Instructs users to save configurations timely to prevent data loss.
Covers system settings, password, reboot, and upgrade.
Details port settings, trunking, mirroring, statistics, rate limit, and storm control.
Explains 802.1Q and port-based VLAN types, their configuration, and management.
Guides on connecting the switch to a console terminal and configuring terminal parameters.
Covers modifying password, setting IP, restoring defaults, saving config, and rebooting via console.
Explains how to create and manage the management VLAN via console.
Outlines a scenario for establishing a LAN with specific network requirements.
Presents a visual representation of the typical network configuration.
Provides step-by-step instructions for implementing the typical network design.
Guides on how to check and install the TCP/IP protocol suite on a PC.
Details the steps to configure the IP address, subnet mask, and gateway on a PC.
To Next Page
