H3C S1526 - 802.1 Q Vlan

User Manual
H3C S1526 Smart Ethernet Switch Chapter 2
Web-based Configuration
2-30
Caution:
If the type of a VLAN is changed, all the previously made VLAN
settings will be cleared.
2.6.2 802.1Q VLAN
Caution:
In the 802.1Q VLAN mode, you can only manage the switch via
a port belonging to the management VLAN. The default
management VLAN of the S1526 is VLAN 1. To modify the
management VLAN, refer to section
3.2.5 “Configuring the
Management VLAN
”.
I. Display
Click [VLAN/802.1Q VLAN] to view VLANs, as shown in
Figure 2-21. 10 VLANs are displayed per page, in the
ascending order of the VLAN IDs. Click <Previous> or <Next>
to view other existing VLANs.