User Manual
H3C S1526 Smart Ethernet Switch
Chapter 3 Configuration Through
Console Port
3-6
MAIN MENU
1. Modify password
2. Set IP address/Subnet mask/Gateway
3. Reset to default configuration
4. Save current configuration
5. Modify management VLAN
0. Reboot
Enter your choice (0-5):
3.2.1 Changing Web-based NMS Password
As prompted, type 1 on the main menu to enter the
password setting page. Enter the old password first, and then
the new password. Enter the new password again to confirm
the new password. The system will return to the main menu
after the password is successfully changed.
Note:
The password is case-sensitive and consists of non-null
character(s) that can be directly input with keyboard, excluding
space and quotation marks. The length of password cannot
exceed 12 characters.
To Next Page
Loading...
Need help?
General
