User Manual
H3C S1526 Smart Ethernet Switch
Chapter 3 Configuration Through
Console Port
3-8
Caution:
Once the switch has been restored to the factory default
settings, all configurations including the user name, password
and IP address of the switch will be restored to the default
settings. Use the default user name, password and IP address
to log in.
3.2.4 Saving the Current Configuration
Type 4 on the main menu. The system will prompt you to
save the current configuration to the switch. Type Y and press
<Enter>. The system will start saving the configuration to the
switch and will return to the main menu after the configuration
is successfully saved, and then return to the main menu.
To Next Page
Loading...
Need help?
General
