H3C S1526 - Logout

User Manual
H3C S1526 Smart Ethernet Switch Chapter 2
Web-based Configuration
2-44
Caution:
z The cable diagnostics function is not suitable for optical
fiber cables.
z Do not plug or unplug the cable during the cable diagnostics
process.
2.9 Logout
Click [Logout] in the [Web-based NMS] screen and click
<Yes> on the confirmation dialog box to log out.
 Note:
You cannot exit normally from the Web-based NMS by closing
the Web browser directly. In such case you must wait for about
five minutes before you can log in again.