Do you have a question about the H3C S5500-EI and is the answer not in the manual?
Defines the target audience for this documentation, including network planners and engineers.
Provides details about the documentation set for the S5500-EI and S5500-SI switch series.
Guides users on how to access the latest product documentation from the vendor's website.
Provides contact information for technical support and the company website.
Explains different multicast models like ASM, SFM, and SSM based on receiver behavior.
Details the components of IP multicast architecture: addressing, host registration, routing, and applications.
Describes Layer 2 and Layer 3 multicast protocols used in networks, including IGMP, MLD, and PIM.
Introduces IGMP snooping as a mechanism to manage multicast groups on Layer 2 devices.
Explains fundamental concepts related to IGMP snooping, including related ports.
Details the switch's behavior when receiving IGMP general queries and membership reports.
Provides practical examples for configuring IGMP snooping, such as group policy.
Introduces IPv6 PIM snooping as a Layer 2 mechanism for managing IPv6 multicast groups.
Provides guidelines and steps for configuring IPv6 PIM snooping on VLAN interfaces.
Demonstrates a practical example of configuring IPv6 PIM snooping on a switch.
Introduces Multiprotocol Border Gateway Protocol (MP-BGP) for IPv6 multicast routing.
Lists relevant RFCs and standards associated with BGP-4 and MP-BGP for multicast.
Outlines the key tasks for configuring MBGP functions, route control, and attributes.