EasyManua.ls Logo

H3C S5500-EI - Ipv6 BIDIR-PIM Configuration Example

H3C S5500-EI
490 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
439
RP: 8001::1
Priority: 192
HoldTime: 130
Uptime: 00:03:39
Expires: 00:01:51
prefix/prefix length: FFDE::/16
RP: 8001::1
Priority: 192
HoldTime: 130
Uptime: 00:03:39
Expires: 00:01:51
prefix/prefix length: FFEE::/16
RP: 8001::1
Priority: 192
HoldTime: 130
Uptime: 00:03:39
Expires: 00:01:51
prefix/prefix length: FFFE::/16
RP: 8001::1
Priority: 192
HoldTime: 130
Uptime: 00:03:39
Expires: 00:01:51
IPv6 BIDIR-PIM configuration example
Network requirements
In the IPv6 BIDIR-PIM domain shown in Figure 108. Source 1 and Source 2 send different IPv6 multicast
information to IPv6 multicast group FF14::101. Host A and Host B receive IPv6 multicast information from
the two sources.
VLAN interface 102 of Switch C acts as a C-BSR, and loopback interface 0 acts as a C-RP of the IPv6
BIDIR-PIM domain.
MLDv1 runs between Switch B and Host A and between Switch D and Host B.

Table of Contents