H3C S5500-EI User Manual

Confi
g
uration
g
uide Added and modified features
IGMP (available only on the
S5500-EI)
Added features: setting the DSCP value for IGMP messages.
PIM (available only on the
S5500-EI)
Added feature: setting the DSCP value for PIM messages.
MSDP (available only on the
S5500-EI)
N/A
MBGP (available only on the
S5500-EI)
N/A
MLD snooping Added features: setting the DSCP value for MLD messages.
IPv6 PIM snooping N/A
IPv6 multicast VLAN N/A
IPv6 multicast routing and
forwarding (available only on the
S5500-EI)
N/A
MLD (available only on the
S5500-EI)
Added features: setting the DSCP value for MLD messages.
IPv6 PIM (available only on the
S5500-EI)
Added features: setting the DSCP value for IPv6 PIM messages.
IPv6 MBGP (available only on the
S5500-EI)
N/A
Conventions
This section describes the conventions used in this documentation set.
Command conventions
Convention Descri
p
tion
Boldface Bold text represents commands and keywords that you enter literally as shown.
Italic Italic text represents arguments that you replace with actual values.
[ ] Square brackets enclose syntax choices (keywords or arguments) that are optional.
{ x | y | ... }
Braces enclose a set of required syntax choices separated by vertical bars, from which
you select one.
[ x | y | ... ]
Square brackets enclose a set of optional syntax choices separated by vertical bars, from
which you select one or none.
{ x | y | ... } *
Asterisk marked braces enclose a set of required syntax choices separated by vertical
bars, from which you select at least one.
[ x | y | ... ] *
Asterisk marked square brackets enclose optional syntax choices separated by vertical
bars, from which you select one choice, multiple choices, or none.
&<1-n>
The argument or keyword and argument combination before the ampersand (&) sign can
be entered 1 to n times.
# A line that starts with a pound (#) sign is comments.

H3C S5500-EI Specifications

General

Brand	H3C
Model	S5500-EI
Category	Switch
Language	English