271
MLD messa
e Actions
Done
In response to a done message for an IPv6 multicast group, the proxy sends a
multicast-address-specific query for the group out of the receiving port. After making sure
that no member port is contained in the forwarding entry for the IPv6 multicast group, the
proxy sends a done message for the group out of all router ports.
Protocols and standards
RFC 4541, Considerations for Internet Group Management Protocol (IGMP) and Multicast Listener
Discovery (MLD) Snooping Switches
MLD snooping configuration task list
Task Remarks
Configuring basic MLD
snooping functions
Enabling MLD snooping Required
Specifying the version of MLD snooping Optional
Configuring IPv6 static multicast MAC address entries Optional
Configuring MLD snooping port
functions
Configuring aging timers for dynamic ports Optional
Configuring static ports Optional
Configuring a port as a simulated member host Optional
Enabling fast-leave processing Optional
Disabling a port from becoming a dynamic router port Optional
Configuring MLD snooping
querier
Enabling MLD snooping querier Optional
Configuring parameters for MLD queries and responses Optional
Configuring the source IPv6 addresses for MLD queries Optional
Configuring MLD snooping
proxying
Enabling MLD snooping proxying Optional
Configuring the source IPv6 addresses for the MLD
messages sent by the proxy
Optional
Configuring an MLD snooping
policy
Configuring an IPv6 multicast group filter Optional
Configuring IPv6 multicast source port filtering Optional
Enabling dropping unknown IPv6 multicast data Optional
Configuring MLD report suppression Optional
Setting the maximum number of multicast groups that a port
can join
Optional
Enabling IPv6 multicast group replacement Optional
Setting the 802.1p precedence for MLD messages Optional
Configuring an IPv6 multicast user control policy Optional
Enabling the MLD snooping host tracking function Optional
Setting the DSCP value for MLD messages Optional
To Next Page
Loading...
